Short Shed Plans

4×12 Lean To Shed Plans

All Our Shed Plans Feature:

  • FREE – How To Build A Shed eBook included with every shed plans purchase.
  • Cost Effective – Our shed plans are designed to make your shed simple and inexpensive to build.
  • Easy To Build From – Professionally drawn with step by step instructions to show both an old pro or a first time framer how to build a shed. (see the plans example below).
  • Start Now – Instant download – The shed plans are emailed to you when you purchase so you can start immediately. We use the free PDF file format so you can print them on your home printer or we can postal mail them to you.
  • Materials List – Easily get bids and use the list numbering system to know what part goes where.

The 4×12 storage shed plans include:

  • 5′-8″ + Overall Height – This makes the shed compliant with codes or homeowners restrictions that only allow 6′ height of shed.
  • Multiple Door Options – Plans to build the door(s) on the front or rear walls are included.
  • 2 Foundations – Pressure treated wood joists sit directly on a bed of gravel or the walls can be framed on a concrete slab. The concrete slab option will make the shed about 6 inches shorter.
4x12  lean to shed top
4x12  lean to shed rear

4×12 Short Shed Plans Door Options

4x12   lean to shed rear
4x12  lean to backyard shed against fence

4×12 Lean To Shed Floor Plan

4x12  Lean To shed floor plans

Lean To Shed Plans Include The Following

  • Foundation: Wood Joists on Gravel bed or Concrete slab.
  • Floor: 2×6 treated floor joists with 3/4″ floor sheathing.
  • Walls Framing: 2×4 framing at 16″ on center with a double top plate, just like a home is framed.
  • Wall Height: The shed front wall height is 4′-2″ above the floor level for the short wall and 4′-111/2″ for the taller wall
  • Door: 3′-10-1/2″ x 3′-10-1/2″ door home built door
  • Siding: T-111 exterior siding. Other sidings such as vinyl may be used.
  • Roof = The roof is framed using 2×4’s to build the rafters. It is sheeted with 7/16″ O.S.B. The plans give you the dimensions and cut angles so you can build the roof rafters on the ground and then put them up on the top plates.
  • Roof Pitch: 2/12, this means that for every 2 inches of rise there is 12 inches of run horizontally.
  • Roof Overhang: 4″ on the front and back. 1″ on the sides.
  • Roofing = Asphalt roll roofing is specified for the low slope roof. Any low slope roofing may be used. Check with your local roofing supplier for suggestions for low slope roof applications.
  • Trim = 1×4 wood, masonite or cement trim materials are used to finish the corners, roof eves, facia, and door.

4×12 Lean To Shed Plans Elevations

4x12 Lean To shed plans example

FREE Shed Materials List (Click To Download and Print)

Free storage shed plans materials list

shedsplansideas

Find DIY projects, free woodworking plans, and home improvement tips. Build your next project with our easy to follow plans

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
close