Garage Shed Plans, shed plans

Gable Porch Plans 10×14

All Our Shed Plans Feature:

FREE – How To Build A Shed eBook included with every shed plans purchase.

Cost Effective – Our shed plans are designed to make your shed simple and inexpensive to build.

Easy To Build From – Professionally drawn with step by step instructions to show both an old pro or a first time framer how to build a shed. (see the plans example below).

Start Now – Instant download – The shed plans are emailed to you when you purchase so you can start immediately. We use the free PDF file format so you can print them on your home printer or we can postal mail them to you.

Materials List – Easily get bids and use the list numbering system to know what part goes where.

The 10×14 storage shed with porch plans include:

7′-7″ or 8′-1″ wall height – The 7′-7″ wall height allows a pre-hung factory built door to go on any wall and reduces the amount of siding and labor needed to build the shed. The 8′-1″ wall height lets you use 92-5/8″ framing studs just like a home.

Factory or Home Built Doors – Using a pre hung door makes the door building and hanging job much easier. The shed plans also include door plans if you prefer to build your own doors.

Multiple Door Options – Drawings explaining how to build the door on the end or sides of the shed.

5 Foundations – Skid, concrete slab, poured concrete pier, concrete block pier, precast pier.

10x14 Gable Shed Plans With a Porch rear view
10x14 Gable Shed Plans With a Porch front elevation
10x14 Gable Shed Plans With a Porch top view
10x14 Gable Shed Plans With a Porch

10×14 Tall Storage Shed Floor Plan

10x14 shed with porch floor plan

10×14 Gable Shed Plans Include The Following:

Options: Plans include options to put the door on the end or side of the shed.

See also  Greenhouse Shed Plans 8x8

Materials List: Use the included materials list to get pricing and to simplify the ordering of materials.

5 Foundations: There are 5 different foundations are included in the plans; 6×6 Wood skid, Concrete slab, Concrete Block Pier, Poured Concrete Pier and Precast pier.

Floor: 2×8 floor joists with 3/4″ floor sheathing.

Walls Framing: 2×4 framing at 16″ on center with a double top plate, just like a home is framed.

Wall Height: The shed wall height is 7′-7″. This wall height will accomodate the door that is outlined in the shed plans and a pre-built, pre-hung factory built door.

Doors: Factory Built doors on pre hung jamb or door plans are included to build the doors yourself.

Siding: T1-11 siding or similar 4’x8′ wood or cement panel siding is specified but you can use any siding you like.

Roof: The roof is framed using 2×6’s and 2×4’s to build the trusses. It is sheeted with 1/2″ O.S.B. The plans give you the dimensions and cut angles so you can build the roof rafters on the ground and then put them up on the top plates.

Roof Pitch: 4/12, this means that for every 4 inches of rise there is 12 inches of run horizontally.

Roof Overhang: 7 1/2″ on all sides.

Roofing: 25 year asphalt shingles.

Trim: 1×3 and 1×6 wood, masonite or cement trim materials are used to finish the corners, roof eves and facia.

Floor Load: 50 pounds per square foot for framed floors. This is the same floor load rating used in building homes.

See also  Greenhouse Plans 8x10

Roof Snow Load: 40 pounds per square foot. This is more than adequate for most areas. If you live in an area with a high snow load you should check with your local building department for your local snow load. Contact us and we can specify stronger roof framing.

Sample of our 10×14 storage shed plans:

10x14 Gable Shed Plans With a Porch Plans Example

FREE Shed Materials List (Click To Download and Print)

Leave a Reply

Your email address will not be published. Required fields are marked *