Dormer Shed Plans, shed plans, shed plans garden

Clerestory Dormer Shed Plans 20×12

All Our Clerestory Dormer Shed Plans Feature:

  • FREE – How To Build A Shed eBook included with every shed plans purchase.
  • Cost Effective – Our shed plans are designed to make your shed simple and inexpensive to build.
  • Easy To Build From – Professionally drawn with step by step instructions to show both an old pro or a first time framer how to build a shed. (see the plans example below).
  • Start Now – Instant download – The shed plans are emailed to you when you purchase so you can start immediately. We use the free PDF file format so you can print them on your home printer or we can postal mail them to you.
  • Materials List – Easily get bids and use the list numbering system to know what part goes where.

The Clerestory Shed Plans 20×12 Include:

  • 7′-7″ wall height – The lower wall height is 7′-7″ which allows a pre-hung factory built door to go on any wall and reduces the amount of siding and labor needed to build the shed.
  • Factory or Home Built Doors – Using a pre hung door makes the door building and hanging job much easier. The shed plans also include door plans if you prefer to build your own doors.
  • 3 Foundations

FREE Shed Materials List (Click To Download and Print)

12x20 clerestory dormer shed plans top view
20x12 clerestory shed plans rear view
12x20 clerestory with dormer shed plans end elevation
20x12 clerestory dormer shed plans front

20×12 Clerestory Shed Floor Plan Example of our shed plans. 

20×12 Lean To Storage Shed Plans Include The Following:

  • Materials List:The shed plans come with a complete materials list that is broken down by parts of the shed.
  • Foundations: There are 3 different foundations are included in the plans; Wood skid, Concrete slab, Treated lumber or metal floor joists set on gravel bed.
  • Floor: 2×6 floor joists at 16″ on center with 3/4″ floor sheathing.
  • Walls Framing: 2×4 framing at 16″ on center with a double top plate, just like a home is framed.
  • Wall Height: The lower shed wall height is 7′-7″.
  • Doors: The door is a 5068 pre-hung, factory made doors to make the 5′ door. The single door is a 2668. The plans include home built door plans.
  • Window: The window is 3020. This means 3′-0″ x 2′-0″.
  • Siding: Textured Plywood siding is what is shown on the plans. You may add or substitute other sidings such as cedar shingles or horizontal lap siding or vinyl siding.
  • Roof: The roof is framed using 2×6’s to build the rafters. It is sheeted with 1/2″ O.S.B. The plans give you a template and dimensions for the birds mouth cut angles. Check with your local building department for roof loading.
  • Roof Pitch: 2/12 for the lower slope roof and 6/12 for the higher pitch roof. This means that for every 2 inches of rise there is 12 inches of run horizontally or 6 inches rise for every 12 inches of run.
  • Roof Overhang: 6″ on all sides.
  • Roofing = Asphalt shingles. Check with your shingle manufacturer for the low slope application for the 2/12 pitch roof.
  • Trim = 1×4 wood, masonite or cement trim materials may be used to finish the corners, roof eves, facia, and door.
  • Floor Load: 50 pounds per square foot for framed floors.
  • Roof Snow Load: 30 pounds per square foot. This is more than adequate for most areas. If you live in an area with a high snow load you should check with your local building department for your local snow load.
See also  Chicken Coop Plans 8x8

Leave a Reply

Your email address will not be published. Required fields are marked *